January 11th, 2014 by Jacqui Blanton

Rain Bird Xeriman Tool

Rain Bird’s Xeriman Tool is idealfor installing Xeri-Bug emitters, PC Modules, and 1/4″ barbed insert fittings directly into 1/2″ or 3/4″ drip tubing, such as Xeri-Tube.

To install the Spot Watering Emitter, place it on the end of the tool and press the barbed point into side wall of 1/2″ Tubing, 1/4″ Barbed Couplings, or 1/4″ Barbed Tees.

Once you press the barbed point in, pull the tool away. The Spot Watering Emitter wll remain embedded in the tubing.

The final step is to push the 1/4″ tubing onto the Spot Watering Emitter.

If you’re trying to remove an emitter, use the side of the tool. 1/4″ Tubing plugs can be used to seal holes left behind in .5″ tubing. You use the bottom of the tool to insert te plugs.

Contact the pros at PoguePoolSpa.com for more info!

xeriman tool