December 22nd, 2013 by Jacqui Blanton

in.k100 Auxiliary Keypad

The in.k100 Auxiliary Keypad by Gecko is a waterproof keypad that gives control to wet fingers. It is designed for in.xm spa systems. It’s available in dual pump & blower or three pump configurations and offers secondary control. The waterproof enclosure is made of plastic and is available in 3 colors: light gray, dark gray, and marble.

Installation:

  • Use the drilling template pictured below
  • Determine the mounting location and stick the template on chosen place
  • Clean the installation surface and peel the adhesive gasket from the back of the keypad
  • Insert keypad and make sure it aligned correctly
  • Ensure it’s properly glued by gently pressing evenly on the entire surface

Connecting the in.k100 to the in.xm:

  • Insert the in.k100′s in.link connector into the appropriate connector

Light Key:

  • Press the Light key once to turn on the light at high intensity
  • Press a second or third time to lower the intensity
  • Pressing the key a fourth time turns the light off
  • A built-in timer automatically turns the light off after 2 hours

Pump 1 Key:

  • Press Pump 1 key to turn on pump at low speed
  • Press a second time to turn a dual-speed pump to high speed
  • A third press turns the pump off
  • A built in timer turns it off after 20 minutes

Pump 2 Key:

  • Press Pump 2 key to turn on pump at low speed
  • Press a second time to turn a dual-speed pump to high speed
  • A third press turns the pump off
  • A built in timer turns it off after 20 minutes

Pump 3/Blower Key

  • Press the Pump 3/Blower key to turn it on
  • Press a second time to turn it off
  • The pump is automatically turned off after 20 minutes

For more information on this and other useful products contact the pros at PoguePoolSpa.com.

drillingt emplate in.k100

IN.K100-Auxiliary-Panel